Description

The WL4 WM-280T(LED) is a high-quality electromagnetic adhesive magnet with LED and a timer. As soon as the power to the lock is lost, the door is not locked (fail safe).

Possibilities

The WL4 WM-280T(LED) is suitable for use with access control systems such as intercom and card readers. The WL4 WM-280T(LED) is usually mounted in or on the frame to keep a door closed. The lock can also be mounted on a wall to allow doors to remain open unless the power is interrupted. With a self-closing/door closer on the door, the door closes as soon as the power fails, for example in the event of a fire alarm or after closing time of a building.

The lock has an LED to indicate the status of the lock. The lock has no mechanically moving parts and therefore has a very long lifespan.

The WL4 WM-280T(LED) has an adhesive force of 280KG and can be powered with 12 or 24VDC. Power supply is not included. The WL4 WM-280T(LED) is supplied with a flat armature plate. Various profiles for the anchor plate are available for suitable mounting. These profiles are included under the “Related” tab.

Most important features

• Fail safe lock
• 12VDC/450mA or 24VDC/250mA
• 280KG holding force
• Including anchor plate
• Status LED
• Door status sensor

© Text is protected by copyright