Description

The WL4 POE-AT-I30 is a professional IEEE 802.3af/at Gigabit High Power over Ethernet (PoE) injector that adds DC 46-52V to the network cable, requiring only 1 network cable for data traffic and power supply. Can be used for both PoE IEEE 802.3af and IEEE802.3at enabled devices. The maximum distance between the injector and a PoE splitter or an 802.3af/at PoE device, such as an access point or IP camera, is 100 meters.

If the WL4 POE-AT-I30 is used in combination with a PoE splitter, the data signal and the power supply can be split again at the other end of the network cable. This means that a non-PoE capable device can also be supplied with power and data signal with just 1 network cable of up to 100 meters.

The WL4 POE-AT-I30 is stable and safe thanks to protection against overvoltage, voltage peaks or short circuit. The WL4 POE-AT-I30 is supplied with a power cord.

Most important features:

• Provides up to 30W and 46-52VDC power over a network cable with RJ-45 plugs to any 802.3af/at capable PoE device
• Gigabit speed
• LED indicators
• Distance up to 100 meters
• Auto-detection of PoE IEEE 802.3af and IEEE802.3at equipment
• Suitable for use with IEEE802.3af/at splitter

© Text is protected by copyright