Description

The Hikvision DS-KD8003-IME2 is a two-wire camera module with a Full HD 2 megapixel 180 degree fisheye lens for use in the Hikvision second generation IP intercom system. In the flexible IP video intercom system, an outdoor station can be used with only the camera module, possibly supplemented with a maximum of 8 additional modules such as a keypad module, a card reader module, an indication module and/or a 6-button apartment module. The modules must be built-in or assembled with the separately available housings.

The system works with one or more intercom within monitor(s). An audio/video conversation with push notifications via the Hikvision smartphone app is also possible. All 2nd generation Hikvision intercom products can be combined with each other. Both IP and 2-wire products can be used together.

Characteristics

The camera has a 2 megapixel Full HD image sensor with a resolution of 1920x1080 pixels and a very wide horizontal viewing angle of 180 degrees. Thanks to the Wide Dynamic Range (WDR) technology, the camera can handle backlight very well. The camera is equipped with a light-sensitive image sensor, which provides a good color image even in conditions with little ambient light. For dark conditions, the camera module is equipped with infrared LED light.

The camera module must be combined with one or more matching Hikvision intercom indoor monitors.

There is a push button and a nameplate on the camera module. The camera module has an omni-directional microphone and 85dB speaker for a clear audio/video conversation. The camera module can be connected to a maximum of 2 electric locks to remotely unlock a door and/or control an electric gate, for example. The camera module has two alarm inputs for magnetic contacts and two inputs for exit buttons. The individual modules (maximum 8) are connected to the camera module and also powered by the camera module.

Edit

The camera module must be built-in or surface-mounted. A single, dual or triple housing is available. Enclosures can be combined. Material for connecting and mounting is supplied with the housings. The camera module is connected to the local network with 1 network cable and can be powered with standard 802.3af PoE from a PoE switch or with a 12VDC/1A power supply (not included).

The datasheet and manual are included under the 'Documentation' tab.

Main features

• 2 megapixel Full HD low illumination image sensor with 146 fish-eye lens
• Infrared night vision
• Remote opening of door and/or gate with monitor or app
• Flexible modular system
• Calling each other
• Surface-mounted or built-in
• Tamper alarm and alarm inputs for door magnet contacts
• RTSP stream
• IP65 weatherproof
• Power supply and signal via 1 network cable with standard 802.3af PoE

© Text is protected by copyright