Description

The Dahua VTO4202FBB-P-S2 is a black 2 megapixel Full HD camera module for the 2nd generation Dahua modular IP video doorbell system. The camera module is a main module without a call button and can be connected and supplied with power with a network cable or with two wires. The VTO4202FB-P-S2 must be combined with other modules.

Possibilities

The camera has a very wide viewing angle of 168.6 degrees horizontally and has a 2 megapixel Full HD image sensor. The module is equipped with infrared LED light for good visibility in the dark. The VTO4202FB-P-S2 has a microphone and speaker for a clear video call via an indoor monitor or anywhere in the world with the app on your smartphone. The module can be connected to an electric lock or, for example, an electric fence to remotely control a door or gate.

The camera module only works with an intercom indoor monitor and can also be used with the smartphone app. The VTO4202FB-P-S2 cannot therefore work stand alone without an intercom monitor and with only the app.

Edit

The Dahua VTO4202FB-P-S2 is made of durable aluminum and plastic and is vandal-resistant (IK07). The complete outdoor station must be combined with a flush-mounted or surface-mounted housing that can be found under the 'Options' tab.

The VTO4202FB-P-S2 is connected to the network with a network cable and can be powered with 802.3af P0E. The Dahua VTO4202FB-P-S2 can also be connected with a two-wire connection to the Dahua VTNS2003B-2 switch and thus be powered and connected to the network and an intercom monitor. The suitable switch is listed under 'Options'. Cables are not included.

Under the 'Documentation' tab there is a link to the manufacturer's product page including the manual and dimensional documentation and a link to the data sheet with all specifications.

Most important features

• 2 megapixel Full HD CMOS camera
• 168.6 degrees horizontal viewing angle
• Infrared night vision
• It is possible to leave a video and audio message by the visitor
• Aluminum, spray-tight (IP65, sealant required) and vandal-resistant (IK07)
• P2P connection, so no port forwarding required
• SIP protocol
• Opening doors remotely
• Alarm output
• Tamper switch
• Exit button input and door status input
• Built-in NO/NC door relay
• RS485 output for safety relay Dahua DEE1010B (not included)
• 12VDC/100mA output
• Power supply and signal via 1 network cable (PoE) or two-core wire
• Surface-mounted or built-in
• Maximum 9 modules

© Text is protected by copyright