Description

The WL4 AIR-BL5003-J is an active infrared (AIR) universal detector set for outdoors and indoors with 3 beams and a maximum distance of 500m (outdoors). The set consists of a transmitter and receiver that must be wired for power and the NO/NC relay connection. The WL4 AIR-BL5003-J has a stainless steel 304 housing with IP67 weather resistance. The WL4 AIR-BL5003-J can be used as a detector for alarm systems, access control systems, smart home systems, an intercom system and, for example, to connect to the alarm input of an IP camera.

Possibilities

The WL4 AIR-BL5003-J has three-way adjustable lenses that can be adjusted with an alignment angle of approximately fifteen degrees horizontally and vertically. The alignment takes place with the built-in LED display. The detector set has a range of up to 500 meters outdoors. The detection can be set when one beam, two beams or all beams are broken at the same time and each beam operates at its own frequency. Adjustment of the laser beam is best done with the WL4 AIR-LDA Laser Beam Aligner. We recommend this laser beam aligner because it has been specifically developed for this model. The WL4 AIR-LDA can be found under 'Options'.

The WL4 AIR-BL5003-J has a tamper switch for removing the lens hood and has a NO/NC relay as an alarm output.

Installation

The WL4 AIR-BL5003-J can be mounted on a wall or pole. Suitable 12VDC or 24VAC power supplies are included in the “Supplies / Power Supplies” category in our online store. Installation instructions for the WL4 AIR-BL5003-J and the WL4 AIR-LDA are included under 'Documentation'.

Most important features

• Maximum 500 meter range for outdoor use
• Laser beam can be aligned with WL4 AIR-LDA
• 1 relay output NO/NC, NC tamper switch
• Adjustable interruption time (50ms, 100ms, 300ms, 700ms)
• IP67 weather resistance
• Operating temperature -25ºC ~ +70ºC
• 12VDC / 24VAC power supply

© Text is protected by copyright